THE AQUA-TANK S80 HOUSING

The precision made aluinium housing consists of the body tube, the front cap and rear cap, which are double o-ring sealed.
The AQUA-LUX S80 VARIO has a mechanical ON/OFF SWITCH System.   (THE TEL-DISPLAY), receptacle are single o-ring sealed and the sightglass for the TEL- display is additonal sealed with a washer.  To recharge the battery the front cap must be opened.

The AQUA-TANK S80 housing is available as PRO (PROFESSIONAL) version with aluminium hard coat surface finishing.  (THE PRO/HD VERSIONS).

All AQUA-TANK´s are either with DRY-CONNECTOR or with WET-CONNECTOR  available. To mount the AQUA-TANK on a bottle or to wear it on the body there are different attachments available.

THE POWER PACK FOR AQUA TANK S80

The power pack of the AQUA-TANK consists of selected high efficiency heavy duty industry type Nicad cells, which are mounted betweeen two plastic shells (PA6.6). The front shell is containing the charging socket. The power pack is complete mounted on the rear cap. In the rear cap there is also the power connector and if provided, the on/off switch and sightglass of the TEL-display.
To recharge the power pack the front cap must be opened. The cap must be unscrewed (cap without outlet) to open the AQUA-TANK and for recharge the power pack. As additional safety against overcharge AQUA-TANK´s have installed  THE THERMAL-DETECTOR.

To switch ON/OFF the lamp all AQUA-TANK S80 are available with a rotating knob on an axis, switching a miniaturswitch, which is mounted inside the cap. The AQUA-TANK S80 is available with different electronics as there are electronic E/A or deep discharge protection TES or TESVG (THE ELECTRONIC CONTROL SYSTEM)

All AQUA-TANKS are available with or without switch.

THE ELECTRONIC CONTROL SYSTEM

THE MULTI-LED-DISPLAY

AQUA-TANK S80  fits and powers these light heads:

AQUA-TANK S80 SPECIFICATION AQUA-TANK S80 PRICES