DIVELITE

 

The DIVELITE is a series of under water lamps, which was designed to meet the requirements of the professional divers.

Slim line, less weight, long operation time, easy handling and without less safety standard.    

DIVELITE battery powered under water lights are designed for the professional use under water and for many kind of purposes.  As standard these lights offers many advantages, which are not given by most of the lamps on the market.

DIVELITE lamps are designed for permanent use under and above water.

The DIVELITE lamps are available for quartz bulbs (-6V/35-50W, -12V/20-100W, -24V/150-250W /-3300K). 

The reflectors are especially designed for the DIVLITE lamp. There are interchangeable reflectors available, either Spot or Flood. For film-/video recordings there is a Flood reflector necessaery. The best view enables the light with the spot reflector.

THE DIVELITE HOUSING

Four parts only - one housing for a submersible depth up to 150m/450ft: housing tube, rear cap, carrying grip, frontglass.

The precisionmade aluminium housing is closed on the rear end by an aluminium cap and on the front end with the borosilicat frontglass. The rear cap and the frontglass are double o-ring sealed.
(THE TEL-DISPLAY), if provided, is o-ring sealed and additional sealed by a washer. For recharge the power pack, the lamphousing  must be opened at the rear cap. The DIVELITE housings are in coloured eloxy finish. The rear cap and the carrying grip are in black colour eloxy finish. Please find the actual colour in the specification list.

THE SEALING

THE FRONTGLASS

THE CARRYING GRIP

THE MATERIAL

THE ELECTRONIC CONTROL SYSTEM

THE POWER-PACK

The power pack of the DIVELITE lamps consists of selected high efficiency heavy duty industry type Nicad cells or NiMh-cells, which are mounted betweeen two plastic shells (PA6.6). The rear shell is containing the electronics, reed sensors and on the front shell there is the socket for the bulb and the charging socket. 

For recharge the power pack and to change the bulb or the reflector the rear cap must be unscrewed to open the DIVELITE housing. As additional safety against overcharge DIVELITE lamps have built-in  THE THERMAL-DETECTOR.
To switch ON/OFF the lamp, all DIVELITE lamps are available with a rotating knob, which contains the magnet to, switch the reed sensor, which is mounted inside the power pack. The DIVELITE is available with different electronics as there are: deep discharge protection ON/OFF (E/A), TES, TESVG or deep discharge protection with dimmer control  > (THE ELECTRONIC CONTROL SYSTEM)

THE REFLECTOR

THE GRIPADAPTER FOR AQUA-LUX S80 AND DIVELITE

DIVELITE SPECIFICATION DIVELITE PRICES