AQUA-LUX S100

AQUA-LUX, the  battery powered under water lights are designed for the professional use under water and for many kind of purposes, where water proofed light is necessary.  As standard these lights offers many advantages, which are not given by most of the lamps on the market.

AQUA-LUX lights of the series S100, S80, AQUA-LUX SWORD and DIVELITE are prepared for permanent use under, as well as above water.

The AQUA-LUX S100 lights are available for quartz bulbs (-12V/100W/-24V/250W/-3300K) and
the AQUA-LUX S100 DAYLITE for daylight bulbs (24W/5500K). 

Either, for best view under water with spot reflector or with the flood reflector for film-/video recordings,  - for different purposes there are interchangeable reflectors.

THE HOUSING AQUA-LUX S100

The precisionmade aluminium housing is closed on the rear end by an aluminium cab and on the front end by the frontring with the borosilicat frontglass. The rear cap and the frontring with frontglass are double o-ring sealed. (THE TEL-DISPLAY) is o-ring sealed and additional sealed by a washer. For recharge the lamp must be opened at the rear cap. The Standard housings are in coloured eloxy and the rear cap and the carrying socket are in black coloured eloxy finish. Please find the actual colours in the specification list.
 

 

THE PRO/HD VERSIONS

 The PRO/HD versions are in aluminum hard coat (AHC™) finish, which protects the housing against chemical and mechanical demages. (AHC™) is used in many technical ranges of application, where high standards in anti-corrosion, isolation, abraison-resistance and measurement stability are demanded.
 

THE STANDARD GRIP

The standardgrip is in coloured eloxy finish and has a knurled surface for excellent carrying comfort.

THE SURVIVAL-GRIP

THE SURVIVAL-GRIP has the same features as the standard grip, but it is closed watertight by caps on both ends for safe keeping money, small keys, lighter. The survival-grip is only available in aluminium hard coat finish for the PRO/HD series.

 

THE ON/OFF MAGNETIC SWITCH

THE CARRYING SOCKET

THE MULTI-FUNCTION LED

THE ELECTRONIC CONTROL SYSTEM

THE SEALING

THE POWER PACK FOR AQUA LUX S100

The power pack of the AQUA-LUX S100 consists of selected high efficiency heavy duty industry type Nicad cells or NiMh-cells, which are mounted betweeen two plastic shells (PA6.6). The rear shell is containing the charging socket and on the front shell there is the spare lampholder and the socket for the bulb. 

For recharge the power pack and to change the bulb or reflector the rear cap must be unscrewed to open the AQUA-LUX S100  housing. As additional safety against overcharge AQUA-LUX S100 have built-in  THE THERMAL-DETECTOR.
To switch ON/OFF the lamp, all AQUA-LUX S100 are available with a rotating knob, which contains the magnet to, switch the reed sensor, which is mounted inside the power pack. The AQUA-LUX S100 is available with different electronics as there are:
deep discharge protection TESVG or deep discharge protection with dimmer control  (THE ELECTRONIC CONTROL SYSTEM)

THE FRONTGLASS

THE SPARELAMPHOLDER

THE REFLECTORS

THE GRIPADAPTER FOR AQUA-LUX S100 AND VARIO S100

THE FILTERHOLDER

 

AQUA-LUX S100 SPECIFICATION AQUA-LUX S100 PRICES