AQUA-LUX S80

 

The AQUA-LUX S80 is a new series of under water lamps, which was designed to meet the requirements of the new generation of divers. Slim line, less weight, long operation time, easy handling and without less safety standard.  More than 20 years of experience and know how in development and  manufacturing of batteries and lighting equipment enabled us to design this wonderful new AQUA-LUX S80 lamp.  

AQUA-LUX S80 battery powered under water lights are designed for the professional use under water and for many kind of purposes.  As standard these lights offers many advantages, which are not given by most of the lamps on the market.

AQUA-LUX S80 is designed for permanent use under and above water.

The AQUA-LUX S80 lamps are available for quartz bulbs (-6V/50W, -12V/50W /-3300K) and
the AQUA-LUX S80 DAYLITE  lamps for daylight bulbs (24W/5500K). 

Either, for best view under water with spot reflector or with the flood reflector for film-/video recordings,  - for different purposes there are interchangeable reflectors.

THE HOUSING AQUA-LUX S80

The precisionmade aluminium housing is closed on the rear end by an aluminium cap and on the front end with a borosilicat frontglass. The rear cap and the frontglass are double o-ring sealed. (THE TEL-DISPLAY), if provided, is o-ring sealed and additional sealed by a washer. For recharge, the lamp must be opened at the rear cap.The AQUA-LUX S80 housings are in coloured eloxy finish. The rear cap and the carrying grip are in black coloured eloxy finish. Please find the actual colours in the specification list.
 

THE HOUSING AQUA-LUX S80

THE SEALING

THE FRONTGLASS

THE CARRYING GRIP S80

MATERIALS

THE MAGNETIC SWITCH

THE ELECTRONIC CONTROL SYSTEM

THE SEALING

THE POWER-PACK S80

The power pack of the AQUA-LUX S80 consists of selected high efficiency heavy duty industry type Nicad cells or NiMh-cells, which are mounted betweeen two plastic shells (PA6.6). The rear shell is containing the electronics, reed sensors and on the front shell there is the socket for the bulb and the charging socket. 

For recharge the power pack and to change the bulb or the reflector, the rear cap must be unscrewed to open the AQUA-LUX S80 housing. As additional safety against overcharge AQUA-LUX S80 have built-in  THE THERMAL-DETECTOR.
To switch ON/OFF the lamp, all AQUA-LUX S80 are available with a rotating knob, which contains the magnet, to switch the reed sensor, which is mounted inside the power pack. The AQUA-LUX S80 is available with different electronics as there are: deep discharge protection TESVG or deep discharge protection with dimmer control  >
(THE ELECTRONIC CONTROL SYSTEM)

THE REFLECTORS

THE GRIPADAPTER FOR AQUA-LUX S80 AND DIVELITE

AQUA-LUX S80 SPECIFICATION AQUA-LUX S80 PRICES